+91-8698009335 | | sales@rendertechindia.com

Products /

Sick Level Sensor

Render Automation Pvt. Ltd. deal with all kinds of Sick Level Sensor

Intelligent solutions for level and point level measurement

Whether for continuous level measurement, point level measurement or both – SICK products offer a wide range of solutions for process engineering, storage, and protection. Based on the installation situation, medium properties, and ambient conditions, SICK provides sensors that ensure efficient processes. As the provider of one of the broadest technology portfolios, SICK brings its knowledge to the forefront.

Sick Level sensors LFP Cubic

  • Level sensor for liquids
  • No mechanical moving parts
  • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm)
  • Resistant to deposit formation
  • Process temperature up to 100 °C,process pressure up to 10 bar
  • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output
  • High enclosure rating of IP 67, rotatable housing and remote amplifier
  • IO-Link 1.1

Sick Level sensors LFV200

  • Commissioning without container filling or medium calibration
  • Immune to deposit formation
  • Process temperature up to 150 °C
  • Two electrical output versions and IO-Link available
  • Pipe extension up to 1,200 mm
  • Hygienic designs with polished surface, CIP- and SIP-capable
  • Housing made of 316L stainless steel
  • Very high repeatability

Sick Level sensors UP56

  • Non-contact measurement up to 3.4 m operating distance / 8.0 m scanning distance limit
  • Pressure resistant up to 6 bar
  • Converter protected by PVDF cover for increased resistance
  • 3-in-1: Continuous measurement, switching signal, and display
  • Analog output can be switched 4 mA ... 20 mA and 0 V ... 10 V
  • Process connector thread G 1 and G 2
  • IP67 enclosure rating
  • Simple operation, also via Connect+

Sick Level sensors GRF18S

  • Rugged fill level measurement in fluid media
  • Small, compact design; no medium calibration required
  • Process temperature up to 55 °C, process pressure up to 16 bar
  • IP 67 and IP 69 enclosure rating
  • Process connection G ½
  • Highly medium resistant due to stainless steel housing 1.4404, polysulfone apex
  • Output available as PNP or NPN transistor
  • FDA compliant, UL