Peters Indu-Produkt

Peters Indu-Produkt is wellknown german brand, which deal with Pressure Transmitter, Pressure Switch, Pressure Switch – Mechanica, Proximity Sensor, Relay Module, Opto-Coupler. We supply Peters Indu-Products in India

Peters Indu India

FOUNDED IN 1974, PETERS INDU-PRODUKT HAS DEVELOPED INTO A COMPANY THAT OPERATES ON AN INTERNATIONAL BASE. PERFECTION IS OUR CONSTANT AIM AND TECHNICAL KNOWLEDGE IS THE TOOL WE USE TO ACHIEVE IT. WITH THIS STRATEGY, WE HAVE DEVELOPED A STANDARD OF QUALITY THAT HAS CONTINUALLY CONVINCED CUSTOMERS WORLDWIDE. WE ARE CONSTANTLY EXPANDING OUR PRODUCT PORTFOLIOS IN THE INDUSTRIAL, AUTOMOTIVE, AUTOMATION AND ENERGY FIELDS. MOREOVER, WE DEVELOP TAILOR-MADE SOLUTIONS THAT SUIT THE NEEDS OF OUR CUSTOMERS – RIGHT FROM THE INITIAL IDEA TO THE FINISHED PRODUCT.

Pressure Transmitter

PRESSURE TRANSMITTER-EPT/DEUTSCH DT/58 TO 14500 PSI DRUCKTRANSMITTER-EPT/DEUTSCH DT/4 BIS 1000 BAR

Operating voltage (0 to 10 V) 15 to 30 VDC
_ Operating voltage (4 to 20 mA) 10 to 30 VDC
_ Output short-circuit-proof
_ Supply voltage reverse polarity protection
_ Electrical connection Deutsch DT 4 pole
_ Fluid connection G1/4
_ Wrench 22 mm
_ Protection class IP67
_ Temperature range –40 °C to +105 °C
_ Temperature range medium –40 °C to +125 °C
_ Housing stainless steel AISi 304

_ Wetted material stainless steel AISI 430 F/17-4 PH
_ Overload pressure see table
_ Hystere +/-0,15% FS max
_ Linearity +/-0,25% FS max
_ Temperature sensitivity (zero point)
+/-0,02% FS/C° max
_ Minimum load for analog output
1000 Ohm (24 V = 600 Ohm) see chart
_ Shock resistance
100 g/11 msec according to IEC 60068-2-6
_ Vibration resistance
20 g max at 10…2000 Hz according to IEC 60068-2-6
_ CE-Conformity according to EC directive 2014/30/EU

PRESSURE TRANSMITTER-EPT/DEUTSCH DT/0 TO 5800 PSI

PRESSURE TRANSMITTER-EPT/AMP SUPER SEAL/0 TO 5800 PSI

PRESSURE TRANSMITTER-EPT/ DIN EN 175301-803/58 TO 14500 PSI

PRESSURE TRANSMITTER-EPT/M12/58 TO 14500 PSI

PRESSURE SWITCH-MECHANICAL/

PRESSURE SWITCH-MECHANICAL/PBS/PNEUMATIC TO 232 PSI

_ Operating fluid Neutral gaseous and liquid fluids
_ Mounting method 2 x drill-hole Ø 5,2 mm
_ Fluid connection
G1/4“ female thread , NPT 1/4“ or flange
_ Environmental temperature –10 °C to +80 °C
_ Maximum pressure 290 psi
_ Operating pressure range 0,2 to 2/0,5 to 8/1 to 16 bar
_ Repeatability < 2% of max. pressure range FS
_ Differential reset see diagram
_ Max. switching frequency 200/min
_ Vibration resistance 10 g (10 to 2000 Hz)

_ Shock resistance 30 g
_ Electrical connection DIN 43650-A (EN 175301-803)
_ Switching element toggle switch with control unit
_ Operating cycles > 2 x 106
_ Operating voltage/current
AC 12: 4 A/250 VAC ; AC14: 1 A/250 VAC
DC 12: 3 A/28 VDC ; DC14: 4 A/28 VDC
_ Degree of protection IP65
_ Material Housing: Pressure die-cast, knob: Alu
_ Seals Perbunan
_ Weight ~ 0,295 kg.