+91-9860307161 | +91- 7276042480 | sales@rendertechindia.com

Products /

Beckhoff KL5001

Render Technology Solutions deal with all kinds of Beckhoff Products


Render Technology Solutions deal with all kinds of Beckhoff Products

KL5001 SSI Encoder-interface up to 1MHz read

SSI Sensor interface, Encoder connection: binary input: D+, D-, binary output: Cl+, Cl-, Power supply: 24V DC via power contacts, Data direction: read

The KL5001 SSI interface terminal enables the direct connection of an SSI encoder that is powered via the SSI interface. The interface circuit generates a pulse for reading the encoder and makes the incoming data stream available to the controller as a data word in the process image. Various operating modes, transmission frequencies and bit widths can be permanently stored in a control register. A screen can be connected via the KL9195 shield terminal.The KL5051 bidirectional SSI interface terminal enables the connection of digital servo drives. The encoder is powered via the SSI interface, which consists of two logic channels. The first channel us used for the positioning of the drive, while the second channel is used to set releases, to transmit parameter data and to read status information and parameter values. The 5 V DC supply voltage can be generated with the KL9505 power supply terminal and fed into the power contacts.


Beckhoff KL5001

Beckhoff KL5001 SSI-Geber-Interface


General Description


Beckhoff KL5001 | SSI Encoder-interface up to 1MHz read
The KL5001 SSI interface terminal enables the direct connection of an SSI encoder that is powered via the SSI interface. The interface circuit generates a pulse for reading the encoder and makes the incoming data stream available to the controller as a data word in the process image. Various operating modes, transmission frequencies and bit widths can be permanently stored in a control register. A screen can be connected via the KL9195 shield terminal.

Technical data KL5001 | KS5001
Technology SSI encoder interface
Number of channels 1 encoder interface
Encoder connection binary input: D+, D-, binary output: Cl+, Cl-
Power supply 24 V DC via power contacts
Current consumption typ. 20 mA without encoder
Current consumption power contacts typ. 20 mA + load
Encoder supply 24 V DC via power contacts
Data transfer rates variable up to 1 MHz, 250 kHz default
Serial input 24 bit width (variable)
Data direction read
Signal output difference signal (RS422)
Signal input difference signal (RS422)
Electrical isolation 500 V (K-bus/field potential)
Current consumption K-bus typ. 25 mA
Bit width in the process image input: 1 x 32 bit data (1 x 8 bit control/status optional)
Weight approx. 60 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all KSxxxx Bus Terminals
Approvals CE, UL, Ex